RocketBoards- Home
- Documentation
- Community
- Projects
- Boards
- Agilex 5 SoC
- Agilex 7 SoC
- Arria 10 SoC
- Nallatech 385A - Arria 10 FPGA Network Accelerator Card
- Nallatech 385A-SoC Accelerator Card with Arria 10 FPGA
- ALARIC Instant DevKit ARRIA 10 SoC FMC IDK by REFLEX CES
- Altera Arria 10 SoC Virtual Platform
- Altera Arria 10 SoC Board
- Nallatech 510T compute acceleration card with Intel Arria 10 FPGA
- REFLEX CES Achilles Arria 10 SoC SOM
- Terasic Arria10 SoC Board : HAN Pilot Platform
- Arria V SoC
- Cyclone V SoC
- Altera Cyclone V SoC Board
- Arrow SoCKit User Manual - July 2017 Edition
- Arrow SoCKit User Manual - November 2019 Edition
- Arrow SoCKit Evaluation Board
- Atlas-SoC Development Platform
- Critical Link MitySOM-5CSx Development Kit
- Cyclone V Ethernet driver problems
- DE10-Nano Development Board
- Terasic DE10-Standard Development Kit
- Devboards DBM-SoC1 module
- Devboards DBM-SoC2 module
- EBV SoCrates Evaluation Board
- Enclustra Mercury SA1 SoC Module
- Enterpoint Drigmorn 5
- Enterpoint Larg 2
- Altera Cyclone V SoC Development Platform
- Mpression Helio SoC Evaluation Kit by Macnica
- Mpression Sodia Evaluation Board by Macnica
- ARIES Embedded - MCV System on Module
- Mpression Borax SOM Module and Development Kit by Macnica
- Enterpoint Mulldonoch 3
- Networked Pro-Audio FPGA SoC Development Kit by Coveloz
- NOVPEK™CVLite
- NOVSOM®CV
- NOVSOM®CVLite
- NovTech IoT Octopus™
- NovTech NetLeap™
- Enterpoint Raggedstone 4
- Solectrix SMARC compliant System-on-Module
- Terasic DE1-SoC Development and Education Board
- Stratix 10 SoC
- Find a Board
- News
Documentation
Similar topics
-
Using Prebuilt SD Card Image
Create an SD card using a pre compiled Linux binary package and use it to boot Linux
-
Arrow SoCKit Evaluation Board v14.0 - How to Boot Linux
-
Booting Linux Using Prebuilt SD Card Image
how to create an SD card using pre compiled Linux binaries package and use it to boot Linux on the Arrow SoCKit Evaluation board
-
Booting Linux Using Prebuilt SD Card Image
how to create an SD card using pre compiled Linux binaries package and use it to boot Linux on the Arrow SoCKit Evaluation board
-
Booting Linux Using Prebuilt SD Card Image
how to create an SD card using pre compiled Linux binaries package and use it to boot Linux on the Arrow SoCKit Evaluation board
Recent Changes
-
Remote FPGA Debug for Agilex 7
Remote FPGA Debug over Ethernet for Agilex 7
-
GSRD for Agilex 7 F-Series Transceiver-SoC DevKit (P-Tile and E-Tile)
Golden System Reference Design for DK SI AGF014EA -
Application Development with Yocto eSDK
Using Yocto Extensible SDK for Application Development -
GHRD for Agilex 5 FPGA E-Series 065B Premium Development Kit
Golden Hardware Reference Design for DK A5E065BB32AES1 -
Building Bootloader for Agilex 5
Building latest bootloaders for Agilex 5 SoC Devices
Table of Contents
CV SoC Development Board Revision Info
- Rev C - fully compatible, no rework is needed
- Rev D - required R522 pull down resistor to be removed in order to support PHY async mode that is required for this design example
How to check CV SoC Development Board revision?
- Check serial code at the bottom back of CV SoC Development Board.
- At the end of the serial code, it should indicate the board revision as shown in below diagram.
Why is this rework needed?
Rev D board is designed to support EtherCat mode which used synchronous tx timing. SoC TSE design example required PHY to work in asynch mode thus it is essential to removed R522 for this purpose. Please refer below diagram for rework details:
© 1999-2024 RocketBoards.org by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
This website is using cookies. More info.
That's Fine