■ Introduction

• Sulfur Development Kit is worked with system-on-module (SOM) of mass production quality
  • The SOM used in the evaluation can be directly incorporated into the system!!
  • Provides a "evaluable" reference design from the day it is received.
• Expands sensor interfaces primarily for industrial and robotics applications (Can be supported with Group B device)
  • HPS: 1G ethernet, USB_UART, USB3.1/2.0
  • FPGA: PCIe Gen3x4, 10G SFP+, MIPI CSI-2, SLVS-EC, HDMI 2.0, Ethernet x2, CXP 2.0, Cameralink, CAN, External pin header
• Supports 25G Ethernet for medical and broadcast equipment applications (Supported with Group A device in a future)
  • HPS: 1G ethernet, USB_UART, USB3.1/2.0
  • FPGA: PCIe Gen4x4, 10G SFP+, 25G SFP28, HDMI 2.0 x2, Ethernet x2, SDI(TBD), External pin header

■ Type-A Carrier Board

● Board photos

● Board block diagram

● Board Features

SOM Development Kit “Sulfur”
SOM	Agilex™ 5 FPGA E-Series SOM
Display I/F	HDMI 2.0
Camera I/F	MIPI CSI-2 4 Lane x2 & 2 Lane x2, CameraLink x2, SLVS-EC x1, CoaXPress (4 Lane) x1
Ethernet	RJ45 (10/100/1000Base-T) x3, 10GbE x1
USB3.1/2.0	USB Type-A SS x4
UART	USB Type-C (USB serial)
PCIe I/F	PCIe Gen3.0 x4
JTAG I/F	JTAG10 pin (Intel® FPGA Download Cable II capable)
Others	CAN x2, 40pin header

■ Type-B Carrier Board

■ Documentation

Category	Item	Rev.	Download	Note
Documentation	Getting Started	1.0	sulfur_getting_started_EN_v1.0.pdf sulfur_getting_started_JP_v1.0.pdf	EN : English JP : Japanese
	User Manual	1.0	sulfur_type-a_user_manual_EN_v1.0.pdf sulfur_type-a_user_manual_JP_v1.0.pdf	EN : English JP : Japanese
	Hardware Manual	1.0	keim-a5esom_hardware_manual_EN_v1.0.pdf keim-a5esom_hardware_manual_JP_v1.0.pdf	EN : English JP : Japanese

■ Board Reference

Category	Item	Rev.	Download	Note
Schematics	SoM Schematics	1.0	Download form
	Type-A Carrier Schematics	1.0	^
BOM	SoM BOM	1.0	^
	Type-A Carrier BOM	1.0	^

■ Reference Designs

Item	Rev.	Download	Note
Linux SD Card Image & FPGA Configuration File	1.0	sdimage_agilex5_sulfur_QPDS24.1_v1.0.zip sulfur_ghrd_top_hps_QPDS24.1_v1.0.sof
HW Reference Design	1.0	sulfur_ghrd_top_QP24.1_v1.0.qar	EMIF Parameter file path is needed to be set absolute path. You should specify it with appropriate path in your PC when re-compile this reference design. File is stored in following location in reference design. Project ROOT(sulfur_ghrd_top_QP24.1_v1.0) emif_parameter lpddr4_sulfur_x32_2rank.qprs Please see following page for more detail. How to change file path for EMIF

* Note: If you want to get any other reference design, please contact to our representative in your region.

■ Regional Support

To get more information about the Sulfur board, local language support, or to register for seminars and workshops in your area, please contact to our representative in your region.

• Global Network (macnica.com)

■ Related Links

• Mpression Sodia Evaluation Board by Macnica | Documentation | RocketBoards.org
• Mpression Helio SoC Evaluation Kit by Macnica | Documentation | RocketBoards.org